addenda and errata
Nanofocusing with aberration-corrected rotationally parabolic refractive X-ray lenses. Corrigendum
aDeutsches Elektronen-Synchrotron – DESY, Notkestrasse 85, 22607 Hamburg, Germany, bLinac Coherent Light Source, SLAC National Accelerator Laboratory, 2575 Sand Hill Road, Menlo Park, CA 94025, USA, cDepartment Physik, Universität Hamburg, Luruper Chaussee 149, 22761 Hamburg, Germany, and dDiamond Light Source Ltd, Diamond House, Harwell Science and Innovation Campus, Didcot, Oxfordshire OX11 0DE, United Kingdom
*Correspondence e-mail: frank.seiboth@desy.de
A correction in the paper by Seiboth et al. [(2018). J. Synchrotron Rad. 25, 108–115] is made.
Keywords: refractive X-ray optics; aberration correction; ptychography; phase plate.
In the paper by Seiboth et al. (2018), there is an error in the caption of Fig. 4. In the original paper, it is stated that the depicted lens deformation is `for a single lens surface'. However, the shown error is for a single lens, which is a bi-concave lens. Thus, the depicted error appears by a factor of 2 larger. In the body of the original article and all other occurrences, especially in Section 3, we refer to the error of a `single lens' instead of a `single lens surface', which is correct.
References
Seiboth, F., Wittwer, F., Scholz, M., Kahnt, M., Seyrich, M., Schropp, A., Wagner, U., Rau, C., Garrevoet, J., Falkenberg, G. & Schroer, C. G. (2018). J. Synchrotron Rad. 25, 108–115. Web of Science CrossRef IUCr Journals Google Scholar
This is an open-access article distributed under the terms of the Creative Commons Attribution (CC-BY) Licence, which permits unrestricted use, distribution, and reproduction in any medium, provided the original authors and source are cited.