view article
Figure 4
Difference of calculated maximum crystal temperatures using the surface heat model and the volume heat model. While such a difference is negligible for the helical undulators, and minor for planar undulators with first harmonic at 8.0 keV, the temperatures are profoundly different between the two models for the planar undulator at 3.6 keV. Also shown in the non-linear region where MLPD is greater than 100 W mm−1, the result is much more sensitive to the heat load model used.

Journal logoJOURNAL OF
SYNCHROTRON
RADIATION
ISSN: 1600-5775
Volume 21| Part 2| February 2014| Pages 366-375
doi:10.1107/S1600577514000514
Follow J. Synchrotron Rad.
Sign up for e-alerts
E-alerts
Follow J. Synchrotron Rad. on Twitter
Twitter
Follow us on facebook
Facebook
Sign up for RSS feeds
RSS