view article
Figure 2
Graphs for the temperature transfer process. The temperature result of the thermal analysis (left), the structural analysis model reconstructed by SOLSH190 (middle), and the schematic for applying temperature loads (right). The nodal number of nodes at the top surface of the structural model is equal to the nodal number of nodes at the lowest shell (first shell) of the thermal model for the two nodes at the same in-plane position. In the BFE command, enum is the element number, and numbers 1, 41, 81, 121 specify the first, tenth, twentieth, thirtieth sub-layer, respectively, Tempi is the temperature value for the ith sub-layer.

Journal logoJOURNAL OF
SYNCHROTRON
RADIATION
ISSN: 1600-5775
Volume 24| Part 3| May 2017| Pages 717-724
https://doi.org/10.1107/S1600577517004738
Follow J. Synchrotron Rad.
Sign up for e-alerts
E-alerts
Follow J. Synchrotron Rad. on Twitter
Twitter
Follow us on facebook
Facebook
Sign up for RSS feeds
RSS