view article
Figure 5
Controlling the mirror to cylindrical surface shapes. (a) Measurements of the mirror surface taken after the ten-step control algorithm is used to achieve cylindrical surface shapes. The piston was added to desired and measures surface profiles for visualization only. (b) Total shape error in nm RMS over ten time steps.

Journal logoJOURNAL OF
SYNCHROTRON
RADIATION
ISSN: 1600-5775
Volume 30| Part 1| January 2023| Pages 57-64
https://doi.org/10.1107/S1600577522011080
Follow J. Synchrotron Rad.
Sign up for e-alerts
E-alerts
Follow J. Synchrotron Rad. on Twitter
Twitter
Follow us on facebook
Facebook
Sign up for RSS feeds
RSS