view article

Figure 2
Coolant manifold machined from Invar 36 in separate pieces. The pin array (a) was made by electro-discharge machining, the block with the coolant passages was milled (b). These pieces were then welded together (c), heat-treated and the mirror–substrate interface surface was ground flat.

Journal logoJOURNAL OF
SYNCHROTRON
RADIATION
ISSN: 1600-5775
Follow J. Synchrotron Rad.
Sign up for e-alerts
Follow J. Synchrotron Rad. on Twitter
Follow us on facebook
Sign up for RSS feeds