view article
Figure 2
Gap g and offset H dependences on the Bragg angle θB for the DCM geometry of Fig. 1[link], including representative miscut manufacturing limitations, i.e. crystals with small asymmetric cut angles α. The quantities of interest are shown on the left and the relative ratio with respect to the nominal case on the right. The θB axis is shown in logarithmic scale to highlight the contribution of the miscut at lower angles (higher energies). The HD-DCM angular limits are represented by the vertical dash-dotted lines at 3° and 60°.

Journal logoJOURNAL OF
SYNCHROTRON
RADIATION
ISSN: 1600-5775
Volume 30| Part 1| January 2023| Pages 90-110
https://doi.org/10.1107/S1600577522010724
Follow J. Synchrotron Rad.
Sign up for e-alerts
E-alerts
Follow J. Synchrotron Rad. on Twitter
Twitter
Follow us on facebook
Facebook
Sign up for RSS feeds
RSS