view article
Figure 1
A schematic illustration of the design for hard X-ray ID beamlines at SLS 2.0 (a top view). After the undulator and front end, the beamline is composed of a section that accommodates one or two monochromators with the same horizontal beam offset, with only one to be used at any one time. Subsequently, different kinds of focusing optics can be installed, such as a KB system or Fresnel zone plates. The focusing optics can also be omitted to use an unfocused beam for propagation-based imaging applications.

Journal logoJOURNAL OF
SYNCHROTRON
RADIATION
ISSN: 1600-5775
Volume 31| Part 4| July 2024|
https://doi.org/10.1107/S1600577524003163
Follow J. Synchrotron Rad.
Sign up for e-alerts
E-alerts
Follow J. Synchrotron Rad. on Twitter
Twitter
Follow us on facebook
Facebook
Sign up for RSS feeds
RSS