view article
Figure 7
(Left) Dynamic evolution of the bimorph mirror's surface profile, measured at 100 ms intervals over a few seconds, before, during and after applying a single piezo response impulse of 400 V to a central electrode. (Right) For the first 1.3 s after T = 0 s, voltage (applied at a slew rate of 300 V s−1) is linearly applied which causes a corresponding linear change in the mirror curvature. After this time, the surface stabilizes with small residual drifts in the curvature.

Journal logoJOURNAL OF
SYNCHROTRON
RADIATION
ISSN: 1600-5775
Volume 32| Part 1| January 2025| Pages 133-144
https://doi.org/10.1107/S1600577524011007
Follow J. Synchrotron Rad.
Sign up for e-alerts
E-alerts
Follow J. Synchrotron Rad. on Twitter
Twitter
Follow us on facebook
Facebook
Sign up for RSS feeds
RSS