view article
Figure 1
Schematic of the fixed-target holder and photograph of lysozyme crystals on the holder. (a) The closed form (left) and the opened form (right) of the holder. Blue dashed lines indicate the length, the opening degree range and the thickness of each part. The separated holder parts are displayed in the center. Blue dashed arrows indicate the magnet attachment system in the holder. (b) Two assembly scheme illustrations of the sample holder. One nylon mesh is placed inside the main holder and the kapton films (left). Two nylon meshes and kapton films are placed outside the main holder (right). (c) Microscope view of lysozyme crystals loaded on the holder (center). After loading crystal solution on the nylon mesh (top), mother liquid from the crystal solution was removed through opposite side mesh pores by tissue paper (bottom).

Journal logoJOURNAL OF
SYNCHROTRON
RADIATION
ISSN: 1600-5775
Volume 32| Part 2| March 2025|
https://doi.org/10.1107/S1600577524011664
Follow J. Synchrotron Rad.
Sign up for e-alerts
E-alerts
Follow J. Synchrotron Rad. on Twitter
Twitter
Follow us on facebook
Facebook
Sign up for RSS feeds
RSS