view article
Figure 3
(a) Capillary holder printing set up. (b) Glue injection. (c) Note how the lower channel, labelled `x', can be seen to be filled with ep­oxy, but that the upper channel, labelled `y', is yet to be injected. (d) O-ring exit seal.

Journal logoJOURNAL OF
SYNCHROTRON
RADIATION
ISSN: 1600-5775
Volume 33| Part 1| January 2026| Pages 195-197
https://doi.org/10.1107/S1600577525009907
Follow J. Synchrotron Rad.
Sign up for e-alerts
E-alerts
Follow J. Synchrotron Rad. on Twitter
Twitter
Follow us on facebook
Facebook
Sign up for RSS feeds
RSS