view article

Figure 4
Fit parameters ΔT (left axis) and Δρ (right axis) as well as Mathematical equation (left axis) along the temperature ramp of T1. The fits are calculated using ΔT = 3 K and from fitting ΔS(Q, T) with the ESRF reference signals as seen in Fig. 3[link]. ΔTMeas. and the expected values Δρ1atm are shown for comparison. Δρ1atm is calculated based on tabulated water density data at a pressure of 1 atm (Lemmon, 2010View full citation) and the measured temperature change, ΔTMeas..

Journal logoJOURNAL OF
SYNCHROTRON
RADIATION
ISSN: 1600-5775
Follow J. Synchrotron Rad.
Sign up for e-alerts
Follow J. Synchrotron Rad. on Twitter
Follow us on facebook
Sign up for RSS feeds