|
|
|
Figure 5
(a) Schematic representation of the experimental sequence used for the pre laser irradiation and post laser irradiation single-crystal X-ray diffraction measurements. A pre laser irradiation diffraction dataset was first collected with the laser off. The crystal was then irradiated for 30 min in total using the fixed 375 nm diode-laser setup. To improve illumination uniformity, the crystal was reoriented relative to the fixed laser beam in four orientations separated by 90°, with 7.5 min irradiation at each orientation. After the laser irradiation was terminated, diffraction datasets were collected at selected delay times to monitor the relaxation of the photoinduced structural state. Panel (b) identifies each dataset filename together with its corresponding temperature, irradiation condition and post laser irradiation delay time. |
Open
access
access
menu![[Figure 5]](yi5197fig5.jpg)