organic compounds\(\def\hfill{\hskip 5em}\def\hfil{\hskip 3em}\def\eqno#1{\hfil {#1}}\)

Journal logoCRYSTALLOGRAPHIC
COMMUNICATIONS
ISSN: 2056-9890

1,1′-Di­phenyl-3,3′-(p-phenyl­enedicarbon­yl)di­thio­urea

aSchool of Chemical Sciences and Food Technology, Faculty of Science and Technology, Universiti Kebangsaan Malaysia, 43600 Bangi Selangor, Malaysia
*Correspondence e-mail: mbkassim@ukm.my

(Received 30 December 2009; accepted 30 December 2009; online 9 January 2010)

The mol­ecule of the title compound, C22H18N4O2S2, lies across a crystallographic inversion centre. The central benzene ring forms dihedral angles of 29.39 (9) and 79.11 (12)°, respectively, with the thio­urea unit and the terminal phenyl ring. Intra­molecular N—H⋯O hydrogen bonds generate two S(6) ring motifs. In the crystal, mol­ecules are linked into chains along [1[\overline{1}]0] by inter­molecular N—H⋯S hydrogen bonds.

Related literature

For general background and crystal structures of thio­urea derivatives, see: Dong et al. (2006[Dong, W.-K., Yang, X.-Q. & Feng, J.-H. (2006). Acta Cryst. E62, o3459-o3460.]); Hassan et al. (2008[Hassan, I. N., Yamin, B. M. & Kassim, M. B. (2008). Acta Cryst. E64, o1727.]); Yamin & Hassan (2004[Yamin, B. M. & Hassan, I. N. (2004). Acta Cryst. E60, o2513-o2514.]). For bond-length data, see: Allen et al. (1987[Allen, F. H., Kennard, O., Watson, D. G., Brammer, L., Orpen, A. G. & Taylor, R. (1987). J. Chem. Soc. Perkin Trans. 2, pp. S1-19.]).

[Scheme 1]

Experimental

Crystal data
  • C22H18N4O2S2

  • Mr = 434.52

  • Triclinic, [P \overline 1]

  • a = 5.769 (2) Å

  • b = 7.919 (3) Å

  • c = 11.534 (4) Å

  • α = 75.961 (10)°

  • β = 87.000 (8)°

  • γ = 89.861 (8)°

  • V = 510.5 (3) Å3

  • Z = 1

  • Mo Kα radiation

  • μ = 0.29 mm−1

  • T = 273 K

  • 0.23 × 0.11 × 0.05 mm

Data collection
  • Bruker SMART APEX CCD area-detector diffractometer

  • Absorption correction: multi-scan (SADABS; Bruker, 2000[Bruker (2000). SMART, SAINT and SADABS. Bruker AXS Inc., Madison, Wisconsin, USA.]) Tmin = 0.937, Tmax = 0.986

  • 5484 measured reflections

  • 1809 independent reflections

  • 1503 reflections with I > 2σ(I)

  • Rint = 0.030

Refinement
  • R[F2 > 2σ(F2)] = 0.051

  • wR(F2) = 0.113

  • S = 1.13

  • 1809 reflections

  • 136 parameters

  • H-atom parameters constrained

  • Δρmax = 0.25 e Å−3

  • Δρmin = −0.16 e Å−3

Table 1
Hydrogen-bond geometry (Å, °)

D—H⋯A D—H H⋯A DA D—H⋯A
N1—H1A⋯O1 0.86 1.94 2.644 (3) 138
N2—H2A⋯S1i 0.86 2.62 3.446 (3) 160
Symmetry code: (i) -x+1, -y+1, -z+1.

Data collection: SMART (Bruker, 2000[Bruker (2000). SMART, SAINT and SADABS. Bruker AXS Inc., Madison, Wisconsin, USA.]); cell refinement: SAINT (Bruker, 2000[Bruker (2000). SMART, SAINT and SADABS. Bruker AXS Inc., Madison, Wisconsin, USA.]); data reduction: SAINT program(s) used to solve structure: SHELXS97 (Sheldrick, 2008[Sheldrick, G. M. (2008). Acta Cryst. A64, 112-122.]); program(s) used to refine structure: SHELXL97 (Sheldrick, 2008[Sheldrick, G. M. (2008). Acta Cryst. A64, 112-122.]); molecular graphics: SHELXTL (Sheldrick, 2008[Sheldrick, G. M. (2008). Acta Cryst. A64, 112-122.]); software used to prepare material for publication: SHELXTL and PLATON (Spek, 2009[Spek, A. L. (2009). Acta Cryst. D65, 148-155.]).

Supporting information


Comment top

The asymmetric unit of the title compound contains one-half of the molecule the other half being generated by the crystallographic inversion centre (Fig. 1). The thiourea fragment (S1/O1/N1/N2/C6/C7/C8) is planar, with atom C8 has the maximum deviation of 0.038 (2)Å from the mean plane. The dihedral angle between the central bridging benzene ring and the thiourea unit is 29.39 (9)° and that between the two benzene rings is 79.11 (12)°. The carbonyl and N-H groups are involved in intramolecular N—H···O hydrogen bonding resulting in the formation of two six-membered rings viz. C7/N2/C8/O1/H1A/N1 and C7A/N2A/C8A/O1A/H1AA/N1A. The CO bond length of 1.220 (3) Å is longer than the average CO bond length (1.200 Å). These features are similar to those observed in the structure of N-benzoyl-N'-(3-pyridyl)thiourea (Dong et al., 2006). Bond lengths are in normal ranges (Allen et al., 1987).

In the crystal structure, intermolecular N—H···S hydrogen bonds (Table 1) link the molecules into a chain along the [110] (Fig 2).

Related literature top

For general background and crystal structures of thiourea derivatives, see: Dong et al. (2006); Hassan et al. (2008); Yamin & Hassan (2004). For bond-length data, see: Allen et al. (1987).

Experimental top

The title compound was synthesized according to a previously reported method (Hassan et al., 2008) with some modification. Terephthaloyl chloride (1.015 g, 0.5 mmol) was added to ammonium thiocyanate (0.770 g, 1 mmol) in tetrahydrofuran and the contents were stirred for 10 min. The precipitated ammonium chloride was removed by filtration and then aniline (1.0 ml, 1 mmol) in methanol was added dropwise. The mixture was refluxed for 5 h and the black coloured solution was dried using a evaporator before it was washed with cool methanol. Yellow crystals of the title compound were obtained by recrystallization from DMF.

Refinement top

H atoms were positioned geometrically [N-H = 0.86 Å and C-H = 0.93Å] and allowed to ride on their parent atoms, with Uiso(H) = 1.2Ueq(C,N).

Structure description top

The asymmetric unit of the title compound contains one-half of the molecule the other half being generated by the crystallographic inversion centre (Fig. 1). The thiourea fragment (S1/O1/N1/N2/C6/C7/C8) is planar, with atom C8 has the maximum deviation of 0.038 (2)Å from the mean plane. The dihedral angle between the central bridging benzene ring and the thiourea unit is 29.39 (9)° and that between the two benzene rings is 79.11 (12)°. The carbonyl and N-H groups are involved in intramolecular N—H···O hydrogen bonding resulting in the formation of two six-membered rings viz. C7/N2/C8/O1/H1A/N1 and C7A/N2A/C8A/O1A/H1AA/N1A. The CO bond length of 1.220 (3) Å is longer than the average CO bond length (1.200 Å). These features are similar to those observed in the structure of N-benzoyl-N'-(3-pyridyl)thiourea (Dong et al., 2006). Bond lengths are in normal ranges (Allen et al., 1987).

In the crystal structure, intermolecular N—H···S hydrogen bonds (Table 1) link the molecules into a chain along the [110] (Fig 2).

For general background and crystal structures of thiourea derivatives, see: Dong et al. (2006); Hassan et al. (2008); Yamin & Hassan (2004). For bond-length data, see: Allen et al. (1987).

Computing details top

Data collection: SMART (Bruker, 2000); cell refinement: SAINT (Bruker, 2000); data reduction: SAINT (Bruker, 2000); program(s) used to solve structure: SHELXS97 (Sheldrick, 2008); program(s) used to refine structure: SHELXL97 (Sheldrick, 2008); molecular graphics: SHELXTL (Sheldrick, 2008); software used to prepare material for publication: SHELXTL (Sheldrick, 2008) and PLATON (Spek, 2009).

Figures top
[Figure 1] Fig. 1. The molecular structure of the title compound, with displacement ellipsoids drawn at the 50% probability level. Atoms labelled with the suffix A are generated by the symmetry operation (2-x, -y, 1-z).
[Figure 2] Fig. 2. Crystal packing of of the title compound, viewed down the a axis. Hydrogen bonds are shown as dashed lines.
1,1'-Diphenyl-3,3'-(p-phenylenedicarbonyl)dithiourea top
Crystal data top
C22H18N4O2S2Z = 1
Mr = 434.52F(000) = 226
Triclinic, P1Dx = 1.413 Mg m3
Hall symbol: -P 1Mo Kα radiation, λ = 0.71073 Å
a = 5.769 (2) ÅCell parameters from 1272 reflections
b = 7.919 (3) Åθ = 1.8–25.0°
c = 11.534 (4) ŵ = 0.29 mm1
α = 75.961 (10)°T = 273 K
β = 87.000 (8)°Plate, yellow
γ = 89.861 (8)°0.23 × 0.11 × 0.05 mm
V = 510.5 (3) Å3
Data collection top
Bruker SMART APEX CCD area-detector
diffractometer
1809 independent reflections
Radiation source: fine-focus sealed tube1503 reflections with I > 2σ(I)
Graphite monochromatorRint = 0.030
ω scanθmax = 25.0°, θmin = 1.8°
Absorption correction: multi-scan
(SADABS; Bruker, 2000)
h = 66
Tmin = 0.937, Tmax = 0.986k = 99
5484 measured reflectionsl = 1313
Refinement top
Refinement on F2Primary atom site location: structure-invariant direct methods
Least-squares matrix: fullSecondary atom site location: difference Fourier map
R[F2 > 2σ(F2)] = 0.051Hydrogen site location: inferred from neighbouring sites
wR(F2) = 0.113H-atom parameters constrained
S = 1.13 w = 1/[σ2(Fo2) + (0.0449P)2 + 0.1485P]
where P = (Fo2 + 2Fc2)/3
1809 reflections(Δ/σ)max = 0.001
136 parametersΔρmax = 0.25 e Å3
0 restraintsΔρmin = 0.16 e Å3
Crystal data top
C22H18N4O2S2γ = 89.861 (8)°
Mr = 434.52V = 510.5 (3) Å3
Triclinic, P1Z = 1
a = 5.769 (2) ÅMo Kα radiation
b = 7.919 (3) ŵ = 0.29 mm1
c = 11.534 (4) ÅT = 273 K
α = 75.961 (10)°0.23 × 0.11 × 0.05 mm
β = 87.000 (8)°
Data collection top
Bruker SMART APEX CCD area-detector
diffractometer
1809 independent reflections
Absorption correction: multi-scan
(SADABS; Bruker, 2000)
1503 reflections with I > 2σ(I)
Tmin = 0.937, Tmax = 0.986Rint = 0.030
5484 measured reflections
Refinement top
R[F2 > 2σ(F2)] = 0.0510 restraints
wR(F2) = 0.113H-atom parameters constrained
S = 1.13Δρmax = 0.25 e Å3
1809 reflectionsΔρmin = 0.16 e Å3
136 parameters
Special details top

Geometry. All e.s.d.'s (except the e.s.d. in the dihedral angle between two l.s. planes) are estimated using the full covariance matrix. The cell e.s.d.'s are taken into account individually in the estimation of e.s.d.'s in distances, angles and torsion angles; correlations between e.s.d.'s in cell parameters are only used when they are defined by crystal symmetry. An approximate (isotropic) treatment of cell e.s.d.'s is used for estimating e.s.d.'s involving l.s. planes.

Refinement. Refinement of F2 against ALL reflections. The weighted R-factor wR and goodness of fit S are based on F2, conventional R-factors R are based on F, with F set to zero for negative F2. The threshold expression of F2 > σ(F2) is used only for calculating R-factors(gt) etc. and is not relevant to the choice of reflections for refinement. R-factors based on F2 are statistically about twice as large as those based on F, and R- factors based on ALL data will be even larger.

Fractional atomic coordinates and isotropic or equivalent isotropic displacement parameters (Å2) top
xyzUiso*/Ueq
S10.32753 (13)0.52539 (9)0.65718 (6)0.0563 (3)
N10.2814 (3)0.2027 (3)0.79479 (17)0.0451 (5)
H1A0.32020.09530.80570.054*
N20.5449 (3)0.2421 (2)0.63257 (16)0.0402 (5)
H2A0.60370.31260.56900.048*
O10.5453 (3)0.0411 (2)0.73721 (17)0.0647 (6)
C10.1594 (5)0.1854 (3)1.0006 (2)0.0506 (7)
H1B0.29460.12511.02360.061*
C20.0015 (5)0.2172 (4)1.0865 (2)0.0580 (8)
H2B0.02740.17961.16720.070*
C30.2010 (5)0.3030 (4)1.0531 (3)0.0570 (8)
H3A0.30860.32321.11110.068*
C40.2439 (5)0.3599 (4)0.9342 (3)0.0582 (8)
H4A0.38070.41840.91190.070*
C50.0854 (4)0.3310 (3)0.8470 (2)0.0504 (7)
H5A0.11480.36960.76640.060*
C60.1173 (4)0.2439 (3)0.8812 (2)0.0413 (6)
C70.3798 (4)0.3128 (3)0.6997 (2)0.0392 (6)
C80.6254 (4)0.0747 (3)0.6550 (2)0.0416 (6)
C90.8197 (4)0.0410 (3)0.5729 (2)0.0366 (5)
C100.9840 (4)0.1665 (3)0.5176 (2)0.0424 (6)
H10A0.97410.27810.53000.051*
C111.1621 (4)0.1265 (3)0.4442 (2)0.0420 (6)
H11A1.27000.21170.40630.063*
Atomic displacement parameters (Å2) top
U11U22U33U12U13U23
S10.0734 (5)0.0418 (4)0.0480 (4)0.0108 (3)0.0225 (3)0.0049 (3)
N10.0520 (13)0.0393 (11)0.0402 (12)0.0059 (9)0.0153 (10)0.0063 (9)
N20.0425 (11)0.0406 (11)0.0337 (11)0.0043 (9)0.0123 (9)0.0046 (9)
O10.0729 (13)0.0485 (11)0.0597 (12)0.0131 (9)0.0335 (10)0.0042 (10)
C10.0528 (16)0.0529 (16)0.0418 (15)0.0031 (13)0.0062 (12)0.0049 (12)
C20.0677 (19)0.0633 (19)0.0397 (15)0.0032 (15)0.0129 (13)0.0097 (13)
C30.0584 (18)0.0592 (18)0.0540 (18)0.0055 (14)0.0247 (14)0.0205 (14)
C40.0433 (16)0.0655 (19)0.067 (2)0.0032 (13)0.0102 (14)0.0221 (15)
C50.0451 (15)0.0641 (18)0.0419 (15)0.0022 (13)0.0032 (12)0.0137 (13)
C60.0410 (14)0.0391 (14)0.0430 (14)0.0015 (11)0.0105 (11)0.0110 (11)
C70.0384 (13)0.0445 (14)0.0346 (13)0.0039 (11)0.0027 (10)0.0106 (11)
C80.0419 (14)0.0419 (14)0.0386 (14)0.0050 (11)0.0056 (11)0.0070 (12)
C90.0368 (13)0.0406 (13)0.0318 (12)0.0052 (10)0.0009 (10)0.0079 (10)
C100.0437 (14)0.0376 (14)0.0462 (15)0.0032 (11)0.0040 (11)0.0124 (11)
C110.0391 (13)0.0401 (14)0.0439 (14)0.0001 (10)0.0086 (11)0.0068 (11)
Geometric parameters (Å, º) top
S1—C71.667 (2)C3—C41.372 (4)
N1—C71.327 (3)C3—H3A0.93
N1—C61.433 (3)C4—C51.383 (3)
N1—H1A0.86C4—H4A0.93
N2—C81.373 (3)C5—C61.383 (3)
N2—C71.396 (3)C5—H5A0.93
N2—H2A0.86C8—C91.495 (3)
O1—C81.220 (3)C9—C101.388 (3)
C1—C61.376 (4)C9—C11i1.390 (3)
C1—C21.389 (4)C10—C111.382 (3)
C1—H1B0.93C10—H10A0.93
C2—C31.361 (4)C11—C9i1.390 (3)
C2—H2B0.93C11—H11A0.93
C7—N1—C6126.8 (2)C4—C5—H5A120.4
C7—N1—H1A116.6C1—C6—C5120.3 (2)
C6—N1—H1A116.6C1—C6—N1118.3 (2)
C8—N2—C7128.3 (2)C5—C6—N1121.3 (2)
C8—N2—H2A115.8N1—C7—N2115.9 (2)
C7—N2—H2A115.8N1—C7—S1125.62 (18)
C6—C1—C2119.5 (3)N2—C7—S1118.42 (17)
C6—C1—H1B120.2O1—C8—N2122.6 (2)
C2—C1—H1B120.2O1—C8—C9121.2 (2)
C3—C2—C1120.4 (3)N2—C8—C9116.2 (2)
C3—C2—H2B119.8C10—C9—C11i119.5 (2)
C1—C2—H2B119.8C10—C9—C8123.1 (2)
C2—C3—C4120.1 (2)C11i—C9—C8117.4 (2)
C2—C3—H3A119.9C11—C10—C9120.3 (2)
C4—C3—H3A119.9C11—C10—H10A119.8
C3—C4—C5120.6 (3)C9—C10—H10A119.8
C3—C4—H4A119.7C10—C11—C9i120.1 (2)
C5—C4—H4A119.7C10—C11—H11A119.9
C6—C5—C4119.2 (3)C9i—C11—H11A119.9
C6—C5—H5A120.4
Symmetry code: (i) x+2, y, z+1.
Hydrogen-bond geometry (Å, º) top
D—H···AD—HH···AD···AD—H···A
N1—H1A···O10.861.942.644 (3)138
N2—H2A···S1ii0.862.623.446 (3)160
Symmetry code: (ii) x+1, y+1, z+1.

Experimental details

Crystal data
Chemical formulaC22H18N4O2S2
Mr434.52
Crystal system, space groupTriclinic, P1
Temperature (K)273
a, b, c (Å)5.769 (2), 7.919 (3), 11.534 (4)
α, β, γ (°)75.961 (10), 87.000 (8), 89.861 (8)
V3)510.5 (3)
Z1
Radiation typeMo Kα
µ (mm1)0.29
Crystal size (mm)0.23 × 0.11 × 0.05
Data collection
DiffractometerBruker SMART APEX CCD area-detector
diffractometer
Absorption correctionMulti-scan
(SADABS; Bruker, 2000)
Tmin, Tmax0.937, 0.986
No. of measured, independent and
observed [I > 2σ(I)] reflections
5484, 1809, 1503
Rint0.030
(sin θ/λ)max1)0.594
Refinement
R[F2 > 2σ(F2)], wR(F2), S 0.051, 0.113, 1.13
No. of reflections1809
No. of parameters136
H-atom treatmentH-atom parameters constrained
Δρmax, Δρmin (e Å3)0.25, 0.16

Computer programs: SMART (Bruker, 2000), SAINT (Bruker, 2000), SHELXS97 (Sheldrick, 2008), SHELXL97 (Sheldrick, 2008), SHELXTL (Sheldrick, 2008) and PLATON (Spek, 2009).

Hydrogen-bond geometry (Å, º) top
D—H···AD—HH···AD···AD—H···A
N1—H1A···O10.861.942.644 (3)138
N2—H2A···S1i0.862.623.446 (3)160
Symmetry code: (i) x+1, y+1, z+1.
 

Acknowledgements

The authors thank Universiti Kebangsaan Malaysia for providing facilities and the Ministry of Science, Technology and Innovation for the research fund (grant Nos. UKM-ST-01-FRGS-0016–2006 and UKM-OUP-TK-16–73/2009).

References

First citationAllen, F. H., Kennard, O., Watson, D. G., Brammer, L., Orpen, A. G. & Taylor, R. (1987). J. Chem. Soc. Perkin Trans. 2, pp. S1–19.  CSD CrossRef Web of Science Google Scholar
First citationBruker (2000). SMART, SAINT and SADABS. Bruker AXS Inc., Madison, Wisconsin, USA.  Google Scholar
First citationDong, W.-K., Yang, X.-Q. & Feng, J.-H. (2006). Acta Cryst. E62, o3459–o3460.  Web of Science CSD CrossRef IUCr Journals Google Scholar
First citationHassan, I. N., Yamin, B. M. & Kassim, M. B. (2008). Acta Cryst. E64, o1727.  Web of Science CSD CrossRef IUCr Journals Google Scholar
First citationSheldrick, G. M. (2008). Acta Cryst. A64, 112–122.  Web of Science CrossRef CAS IUCr Journals Google Scholar
First citationSpek, A. L. (2009). Acta Cryst. D65, 148–155.  Web of Science CrossRef CAS IUCr Journals Google Scholar
First citationYamin, B. M. & Hassan, I. N. (2004). Acta Cryst. E60, o2513–o2514.  Web of Science CSD CrossRef IUCr Journals Google Scholar

This is an open-access article distributed under the terms of the Creative Commons Attribution (CC-BY) Licence, which permits unrestricted use, distribution, and reproduction in any medium, provided the original authors and source are cited.

Journal logoCRYSTALLOGRAPHIC
COMMUNICATIONS
ISSN: 2056-9890
Follow Acta Cryst. E
Sign up for e-alerts
Follow Acta Cryst. on Twitter
Follow us on facebook
Sign up for RSS feeds